B bobkat Wrench Pro Points 16 Location Friday Bridge Wisbech Car Tiger Cub 30 December 2012 #1 hi can any one help i have a sierra type 9 5 cog box would it go straight on to a zetec engine or a 2 lt twin cam later sierra engine thank you
hi can any one help i have a sierra type 9 5 cog box would it go straight on to a zetec engine or a 2 lt twin cam later sierra engine thank you
old-git Moderator Points 657 Location Essex Car Elan & Robin Hood 30 December 2012 #2 Pinto bellhousing bolts on to Zetec block. Some people make up a 1mm thick spacer plate to fill in a few gaps between bellhousing and block. The twin cam block is basically the same as the Pinto version so the gearbox/bellhousing will fit.
Pinto bellhousing bolts on to Zetec block. Some people make up a 1mm thick spacer plate to fill in a few gaps between bellhousing and block. The twin cam block is basically the same as the Pinto version so the gearbox/bellhousing will fit.
B bobkat Wrench Pro Points 16 Location Friday Bridge Wisbech Car Tiger Cub 30 December 2012 #3 ok thank you steve