E46 328 (1999) - Does any know who sells headers/ exhaust manifolds with a 2.25" outl

hough

Road Burner
Points
67
Location
Poole, England
Car
VW T5 swb 2.5tdi
as the thread states does anyone know who sells or makes headers for my BMW E46 328 with twin 2.25" outlets, iv seen loads on ebay but they are all for lhd only and i need a rhd version, or can anyone help design a new header so i can fabricate one?????
 
Re: E46 328 (1999) - Does any know who sells headers/ exhaust manifolds with a 2.25"

Stainless Steel Exhaust Systems, will make any BMW part you need and prices are cheaper than main dealer costs. It's worth a try .
 
Re: E46 328 (1999) - Does any know who sells headers/ exhaust manifolds with a 2.25"

Hi you could try talking to Roy at C A Technollogies, a BMW specialist.
 
Last edited by a moderator:
Re: E46 328 (1999) - Does any know who sells headers/ exhaust manifolds with a 2.25"

hey s70r is this the place you mean www.stainlesssteelexhausts.com, if not can you tell me the web address, and prince i was thinking of making my own exhaust header but not to sure how to work out the length of the primarys, etc but would be good to give it a go tho.....

and thanks ninja600 iv tried them already and they said about buying a supersprint header but at nearly £1400 it seems a bit steep
 
Last edited:
Re: E46 328 (1999) - Does any know who sells headers/ exhaust manifolds with a 2.25"

Hi you could try talking to Roy at C A Technollogies, a BMW specialist.

CA and Roy are both brilliant. But they don't custom make one-offs.

hey s70r is this the place you mean www.stainlesssteelexhausts.com, if not can you tell me the web address, and prince i was thinking of making my own exhaust header but not to sure how to work out the length of the primarys, etc but would be good to give it a go tho.....

and thanks ninja600 iv tried them already and they said about buying a supersprint header but at nearly £1400 it seems a bit steep

I gathered that. But what I mean you could design your own by basically copying the LHD version you found. It'll give you an idea of where to bend etc.
 
Re: E46 328 (1999) - Does any know who sells headers/ exhaust manifolds with a 2.25"

Try giving John Ashley a call (ASHLEY EXHAUSTS) been around for a very long time. John's built me a couple of systems, one for my Saab 9-5 280bhp including the fron down pipe. and one for my BMW E36 328 with 350bhp sounded the absalute dogs. Heres John's mobile number, tell him Paul with the Saab gave you his number. It might take him a minute to rember me.... but i'm sure he will. 07973 540 145. He will 100% be able to help you out. Good Luck.
 
Re: E46 328 (1999) - Does any know who sells headers/ exhaust manifolds with a 2.25"

thanks ninja600 will give him a call tomorrow.... if no luck i might mod my header by removing the 2.0" secondary tube and replace it with a large 2.25" tube at work
 
Last edited:
Re: E46 328 (1999) - Does any know who sells headers/ exhaust manifolds with a 2.25"

I believe our Saab resident T9 also had work done by Ashley's.
 
Re: E46 328 (1999) - Does any know who sells headers/ exhaust manifolds with a 2.25"

I was thinking of cutting my headers where the arrows are and remaking the two section, as at the welded section the tube measures 2.25" or 57mm which is the width i want!!!!
 

Attachments

  • exhaust1.jpg
    exhaust1.jpg
    49.2 KB · Views: 1

Similar threads


Please watch this on my YouTube channel & Subscribe.


Back
Top