drivers seat

There should be 4bolts holding it to the cars floor, take it out and see as there is not much space to investigate it properly, sounds like is jammed or lever broke off the actual locking mechanism
 
I can't think about anything else if it just stopped working without warning, jammed runners or stuck in locked position, if the lever is in one piece together with a locking bolt then not really, but if there are one or two strings pulling the locking the seat than one or both of them could just snapped and the spring on the lever will still give you a felling like it operates normally but it's not as the locking pins not moving at all
 
I have replied to your p.m. Paddy. There are differences between early and late seats, the early ones were manual forward/back control, up to about mid '91, then they were electrically controlled.
This may be your problem, no electrickery to move it and no manual option as you have put in a seat from a later model.
Without more info this is another hard one to answer. :)
 

Please watch this on my YouTube channel & Subscribe.


Back
Top