B
bodster2
Guest
BEWARE OF RINSPEED AND BORBET ALLOY WHEELS!!!
I bought a set of RINSPEED C5/1 23" Alloys about 9 months ago and have covered under 5000 miles in them.
I was driving with my family onboard last month and one of the rear tyres had a blow out and completely shredded. Luckily I wasn't going to fast so managed to control the skid.
When I fitted the spare I noticed the inside of the RINSPEED alloy had cracks all the way around leading from the inside edge towards the centre.
I thought this was a one off so decided to buy a new RINSPEED alloy.
My car has just been into Land Rover to fit the new RINSPEED alloy and to check a problem I've been having with the tyres going flat. It turns out that all 3 of the other RINSPEED alloys have similar large unrepairable cracks in them which are the reason for the tyres constantly going flat. This is obviously not acceptable on a set of alloys that are only 8-9 months old and have covered so few miles.
When I contacted RINSPEED and BORBET (who manufacturer the alloys for Rinspeed) I asked them to replace or refund the wheels under warranty due to their poor build quality, saying that it was probably a bad batch and overlooking the fact that my families lives were put at risk.
I was eventually told by the director of RINSPEED, Mr. Frank M. Rinderknecht, that BORBET say the failure was due to my driving style, i.e. smashing into kerbs etc and that they were not prepared to honour the warranty!
I was furious as I am over cautious not to damage the wheels and would say I'm a pretty safe driver.
Rinspeed say this is nothing to do with them as the wheels are manufactured by BORBET. BORBET will not reply to any of my emails even though I have threatened legal action.
Mr Bederke of BORBET has failed to respond so I can only assume that BORBET and RINSPEED alloy wheels are dangerous!
I bought a set of RINSPEED C5/1 23" Alloys about 9 months ago and have covered under 5000 miles in them.
I was driving with my family onboard last month and one of the rear tyres had a blow out and completely shredded. Luckily I wasn't going to fast so managed to control the skid.
When I fitted the spare I noticed the inside of the RINSPEED alloy had cracks all the way around leading from the inside edge towards the centre.
I thought this was a one off so decided to buy a new RINSPEED alloy.
My car has just been into Land Rover to fit the new RINSPEED alloy and to check a problem I've been having with the tyres going flat. It turns out that all 3 of the other RINSPEED alloys have similar large unrepairable cracks in them which are the reason for the tyres constantly going flat. This is obviously not acceptable on a set of alloys that are only 8-9 months old and have covered so few miles.
When I contacted RINSPEED and BORBET (who manufacturer the alloys for Rinspeed) I asked them to replace or refund the wheels under warranty due to their poor build quality, saying that it was probably a bad batch and overlooking the fact that my families lives were put at risk.
I was eventually told by the director of RINSPEED, Mr. Frank M. Rinderknecht, that BORBET say the failure was due to my driving style, i.e. smashing into kerbs etc and that they were not prepared to honour the warranty!
I was furious as I am over cautious not to damage the wheels and would say I'm a pretty safe driver.
Rinspeed say this is nothing to do with them as the wheels are manufactured by BORBET. BORBET will not reply to any of my emails even though I have threatened legal action.
Mr Bederke of BORBET has failed to respond so I can only assume that BORBET and RINSPEED alloy wheels are dangerous!