air bag simulater

[pug206]

where can i get a airbag simulator to plug in under my front seats because i have remover the standered seats and put aftermarket buchet seats in the car and i am getting the airbag warning light on the dash and air bag fault on the digital read out

 

[pgarner]

resistor across the pins, but you would need to find out what resistance the airbag gave

 

[Yugguy]

Isn't there a coding device you can use, like vagcom for vw cars, which would disable the fault in the ecu?

 

[stamford]

I thought I had seen this before

http://www.torquecars.com/forums/f76/aftermarket-seats-20793/

You need to find out what the three wires do as mine only had two and they were BMW plugs fitted to the MG-Rover.

 

[sambelsher]

where would i find out what the 3 cables do and what resistance the airbag gave

 

[jarrus]

Can you get hold of a service manual or talk to a tecnition at a dealership?

 

[sambelsher]

no i cant get hold of then manual and i dont know anyone who could look at it

 

[jarrus]

Best thing to do is to remove the whole system all together then,

air bag ecu is under the dashboard and center console, be sure to remove both air bags and the light from the binical.