97 GC 4.0 cranks but won't start

Slugbug

Newbie
Points
1
Location
Sweethome, Oregon
Car
'00 VW Bug 1.8t
I've replaced crankshaft position sensor, ignition coil, disturbitor rotor, throttle position sensor, plugs, wires, disturbitor PO had replaced recently. I just bought it it drove for 2 days then just won't start. So bummed. Any ideas
 
check the oil pressure sensor wires if not broken; and fuel pump and fuel system if operating when you switch to the "On" position. A simple check will just to check the condition of that fuel filter if it hasn't been changed in a while :)
 
Hello and a very warm, welcome to TorqueCars from me the admin!

So sorry for my very slow reply, my mum recently died and on top of that I've injured my back and shoulder so couldn't use a mouse for weeks!

I'm getting back into the swing of things now, but have to take it slowly.

Did you get this sorted or are you still struggling with it?

My first thing would be to break and make all connections around the plugs and sensors. Check engine for fuel/spark - these are the common issues in a non start.
 

Please watch this on my YouTube channel & Subscribe.


Back
Top