Hi all.
In the throws of building up a Aum 1.8t engine with the 06 block.
Iam looking for 280/300 whp at the end of the day for street use.
I know the crank is forged and that the rods are the real problem with the engine.
It appears that the bore diameter on the stand 1.8t blocks all appear the same, as do the rods lengths
Therefore would I be right in thinking that forged H section rods and forged pistons from a BAM engine will fit my block ?
Thanks for your time.
Bill
In the throws of building up a Aum 1.8t engine with the 06 block.
Iam looking for 280/300 whp at the end of the day for street use.
I know the crank is forged and that the rods are the real problem with the engine.
It appears that the bore diameter on the stand 1.8t blocks all appear the same, as do the rods lengths
Therefore would I be right in thinking that forged H section rods and forged pistons from a BAM engine will fit my block ?
Thanks for your time.
Bill