Search results

hi again i have placed a new throttle body idle valve, but it starts up the same, with idle shakes and it stalls, but there is lambda sensors i havent yet fitted can that be a probs as they did say its gone, help

thanks for the info i dont know which one has gone it knock when i drive or turn left or right, where is that ball joint at, i never done one b4 is it hard to fix, and cost

ok thats fine, i have this probs with my car as i was driving i can hear knocking under the car and when steering the car, it sounds funny never heard it, engine is fine .

hi i need real help ppl, i need a turbo blanking plate for my turbo, so i can move my dump valve, i seen a loud dump but i need help fitting it, it says i need 32mm connextion pipes ? where do i get this parts from ?

yes its 4 bolts, and wires, i need a turbo plate for my dump valve, so i can move it. my dump v, is on the turbo side so i need one of them where can i check,

where i got it from they was asking me part number for mines thats fine i thought will it fit, its coming tommows, is it easy to do,

hi i have bought a throttle body from a 1999 rover 620ti , but will it fit mines 620ti 1995 coz someone said they all same

yes its true but if i go t25 i can upgrade to 200bhp later, wat esle do i need to turbo conversion this, do japan make this manifold in japan any sites ?

yes thats good news, wat will t25 cost to last me abt 1 year, plus i want quick spool time, does any one know manifold makers for this, contacks

so if i take my manifold to scrap yard they will make me one ? is there others i can try, also wat turbo will i need to push 140 bhp

sorry i mean turbo manifold hard to find

hi i need help to turbo a micra k11, where can i get a cheap manifold, for starters,

thanks for that but i had it tuned and found the problems on idle valve sensor, and lamba has gone,

ohh i didnt know ill have a look thanks for that

i did look cant find one.

hi people i have found the problem out and solved it, but i need a cheap idle valve control, and lamba sensoirs gone, so thanks to one in a million, pg, turbo nutter, can anyone give me a link to buy stuff cheap i tryed myself

yes i placed my leads and sparks same problems, starts up then switches off when it idles. am getting this man sunday with lap top pluging to check it. can it be ecu

yes the sparks are clean, there was oil on top of engine nothing in there sparks

yes ill try local 1st i think thanks

yes my leads are a bit holes on em and crap thought that might be the probs, also cant find them on ebay

hi i had same probs starting up, but i did same thing wat u said clean my sparks and the trottle body, and it fired up no probs. so wat does that mean, will i need new sets of spark plug leads ? its a bit lumpy on idle 1000rpm, and when driving,

ok thanks

yes ill try that 1st thanks for ur help

yes thats true 1 by 1, wat will it cost

ok thats fine then, is it hard to do, can i change my sparks same time

thanks for pic ill try that but i dont have k n air filter only rover standed one. wat do i clean it with if dirty

ok wat will it cost my self to do, with the stuff to buy

yes other 2 days ago it was fine. but when it went a bit froze outside it started that prob

yes i know but i just bought the car few weeks now. can it be needs new leads and spark

yes it drives but it needs holding the rev all times, its like gona cut off any min,

well the owner said dec 09.

ok my car starts and stutters and shakes on idle then drops rev under 1000rpm and cuts out. i have to hold the rev abt 4000rpm till its warmed up then its ok for few hours, it didnt start today same probs

hi i have a rover 620ti all standerd 1995 just bought few weeks ago, drives good but last night i started the car up didnt start it stutters then goes off . i thought might be petrol so i put a gallon and started again 5 mins warn up and was ok, in morning doing same when i turn key can it be...

well can u post it. if i paid on pay pal , and can u show me price for each item

but my dump valve is fitted on turbo and if i take it of i need to blank plate it, can u help

yes its gona be hard and cost. ok wat abt a loud dump valve where can i get one from wat make

its 200bhp now nothing on it. wat will i need to get 300bhp .

am not sure tbh its fitted on the side of turbo forge dump valve. i want a dump valve so loud u can hear it. any for sale from ur guys, 07810311484 call me if u have plz. wat bhp power will i gain if i add a good gt28 turbo and decat pipe,

hi i just bought a rover 620ti 1995. i need some help its standerd its got a forge dump valve but i want louder. also wat turbo can i get bigger one to now. do u know

hi i dont have the corsa b yet. but the wheels gona be 17inch 4x100 and i dont have wheel spaces. can u tell me with out looking at it wat i need thanks?