Twincharging a Honda Civic Type r

Hi and welcome |B

Yes you can as there are a couple of kits available on the net.

I have an acquaintance that has the centrifugal type on her FN2 for 2 trouble free years.

IIRC it cost $10 k Aussie dollars including a HD clutch fitting and tuning and I think that you will also need a Hondata as well .
 
Dont forget to reinforce your engine else it might pop with the extra pressure.
Or is it strong enough already?
 
IMO 4 trouble free motoring build it right with a chemically cleaned block and head forged pistons and rods with the whole rotating assembly including the clutch and flywheel dynamically balanced with a metal head gasket ARP studs everywhere upgraded clutch,fuel pump,injectors and dyno tuned/mapped a bit on the conservative side.

PS ensure that the bores are torque plate honed and I suggest Total Seal gapless rings for better cylinder seal and less blow by.
 
I'll be very interested to hear your experiences with this project, please keep us updated.
 

Similar threads


Please watch this on my YouTube channel & Subscribe.


Back
Top