Recent content by tafungwa

  1. T

    BKY with EGR and without EGR compatibility

    Will update. the car is starting without any hesitation, drives and accelerates fine and not stalling at all. To me only a perfectionist will be concerned with minor vibration. For VW polo, BKY without EGR is interchangeable with BKY with EGR employing same ECU. But I will code out EGR when...
  2. T

    BKY with EGR and without EGR compatibility

    I completed the switch from an engine with EGR to the one without EGR. the engine is starting fine but is not stable when engine is hot, so I will code out the EGR since the ECU was used on engine which had an EGR
  3. T

    BKY with EGR and without EGR compatibility

    VW polo has an engine BKY with an Exhaust Gas Re-circulation (EGR) and the other has no Exhaust Gas Re-circulation (EGR). Are the two engines interchangeable without any problems, or there is need for re-coding of the ECM to match the change or new matching ECM is required.
  4. T

    VW polo 9N3, 2005 with 1.4L BKY belt driven engine to to 1.6L BTS chain driven engine

    so in brief chains are better and belts are good if preventative maintenance is done correctly
  5. T

    VW polo 9N3, 2005 with 1.4L BKY belt driven engine to to 1.6L BTS chain driven engine

    Noted, your reply has encouraged me, so I am in right track. The issue now is on the reliability of Chain synchronized engine compared to Belt synchronized engine. Which one has pros better than cons for these two engine systems especially for VWs.
  6. T

    VW polo 9N3, 2005 with 1.4L BKY belt driven engine to to 1.6L BTS chain driven engine

    hie I do have VW polo 9N3 of 2005 with 1.4L BKY belt driven engine with a 4 speed 001 automatic gearbox with identification code GJG. I did a rebuild on the engine after the timing belt snapped about a year ago and the engine operated well after the rebuild but now the engine is smoking and i...
  7. T

    Volkswagen Polo Engine Conversion

    hie I do have VW polo 9N3 of 2005 with 1.4L BKY belt driven engine with a 4 speed 001 automatic gearbox with identification code GJG. I did a rebuild on the engine after the timing belt snapped about a year ago and the engine operated well after the rebuild but now the engine is smoking and i...
  8. T

    Volkswagen Polo Engine Conversion

    Hie everyone, I have a 9N3 with a 1.4L BKY engine belt driven and 4 speed auto gearbox, is it possible to drop in a 1.6L BTS engine chain driven and its associated auto gearbox without alterations?

Please watch this on my YouTube channel & Subscribe.


Back
Top