Recent content by RFA9000

  1. R

    wrx help

    my 1995 wrx import is blowing it's coolant water out when boosting, it has just had new head gaskets fitted as i though this would stop it ,dose any one have any idears ???
  2. R

    MMCd datalogger

    I have brought a palm m505 pda with the MMCd datalogger softwear on it but i cant get it to talk to my car (1994 mitsubishi lancer gsr 4g93t engine) dose anyone know what settings the MMCd softwear needs to be on for it to work any info would be grate
  3. R

    mitsubishi gsr

    all three lol, it was cleaned refited ,then got one from the internet , then a new one from japan
  4. R

    mitsubishi gsr

    many thanks but the idle control valve has been cleaned ,checked and replaced so has the coolent temp sender for the ecu , i have been told to look in to the maf sensor as this could be telling the ecu the wrong info , could this be true? when the mot was done they did say although the co was in...
  5. R

    mitsubishi gsr

    tickover when warm is fine 850 and steady , it has a bailey dump valve ,air filter and back box and the intercooler pipe work has been changed for bigger id , when u start the car up from warm it revs to 1500 and comes bak down to 850 within seconds witch is what it should do it only rev high...
  6. R

    mitsubishi gsr

    hi can anyone help, on first start up when cold the engine will rev up to 2500 rpm ive had the throtle set and had all the sensors checked all is ok the only thing that stops this from happining is to disconect the induction pipe between turbo and manifold and then it starts up and revs normal...
  7. R

    309 mi16

    thanks for the reply , ur rite they never did a auto so this is gonna be somthing different , im only realy after a wireing diagram for a 405 mi16 early model , i alredy have a diagram for the bx gti 16v and from what i can work out there are two pins on the ecu that are different. also the 405...
  8. R

    309 mi16

    hi , i need help , can anyone tell me were i can find a wireing diagram for the mi 16 engine and has any one fitted to a auto box be for ,any info would be grate ,:D
  9. R

    Hello

    thanks for the welcome i see u ur near the pod do you go alot ?
  10. R

    Hello

    i sypathise with u ,its always heart breaking when things break , but the feeling u get when you have repaired it and blip it done the road again, will make up for it :bigsmile:
  11. R

    Hello

    hi , many thanks for the welcome ,no i dont have the hot engine ,that engine is used in the newer saab 93-95 with the t7 management where as mine has the t5 management, the better one to tune so they say, and yeah the heater is great cant say for the ac as the weather is never hot enough to use...
  12. R

    Hello

    yeah i did it all started when no2 bigend let go ,i only had the car 6 months gutted :( so i striped it and also found the crank split in 3 places (dont ask how ) but even saab had never seen anything like it ,so i had to find another one witch need to be ground, so i decided to get the hole lot...
  13. R

    Hello

    a posh vauxhall !!!!!! maybe if it was the newer saab or the 900 ,in my eyes it the last of the true saab lol well i had the car for four years now and its only been on the road for two of them :( so what u running in urs ?
  14. R

    Hello

    hi there, yes it is a turbo ,a 1994 aero in black the only colour to have!!, ive done the usual, lowered by 40mm and sat it on 18in megastars. the windows are tinted ,decat pipe and a 3.5in tailpipe, also a carbon fibre rear wing. as for the engine its been ballanced ,fuel pressure regulator...
  15. R

    Hello

    hi everyone , im rob and i drive a 1994 saab 9000 with a few mods , is there any other saab nuts about ? i cant be the only one LOL!! as for the rest of you lesser car drivers (LMAO)a big HELLO !!

Please watch this on my YouTube channel & Subscribe.


Back
Top