Recent content by DIY011

  1. D

    Just fitted a turbo charger into my stock engine

    nah mine is a single outlet waste gate
  2. D

    Just fitted a turbo charger into my stock engine

    can u give me an example or a picture of a two flappers turbine so i get what you mean? :/
  3. D

    Just fitted a turbo charger into my stock engine

    my engine is a SOHC 8v 84 hp and 127 nm stock
  4. D

    Just fitted a turbo charger into my stock engine

    yea , its going on so well now i just need a fuel regulator with boost referenced vacuum to install the electric fuel pump because the stock mechanical is worthless then i'll start to adjust the AFR by jetting the carb. and adjusting the regulator
  5. D

    Just fitted a turbo charger into my stock engine

    connected the pipes successfully noticed a lot of extra torque :D
  6. D

    Just fitted a turbo charger into my stock engine

    thx for the support guys and i will keep posting the progress .. tomorrow i will get the pipes , blow off and intercooler connected @SLEEPER i already measured it , the turbine is toyota CT12 i bought it used and measured it's boost it reads 1.3 bar max when waste gate isn't connected it...
  7. D

    Just fitted a turbo charger into my stock engine

    Hey guys , as i told you before that i'm gonna fit a turbo charger into my stock fiat 131 with engine 1600cc SOHC 8v using the blow through carburetor I still didn't connect the piping yet i've connected the header , exhaust , oil lines and water lines Now i need you to give me your...
  8. D

    issue fitting my turbine

    okay i started installing the turbo kit as u guys know now im having an issue with installing the turbine because i dont have a space for it so i thought maybe if i removed the battery to the other side and fix the turbine on the battery's place and then make a tube from the exhaust manifold...
  9. D

    I bout a turbo kit .. any advice before installing !!?

    @wayne i know its gonna be super hard but how could i know if i didnt try
  10. D

    I bout a turbo kit .. any advice before installing !!?

    @T9 as i said its not about worth or not its about learning thats all even if i had to get the connecting rods outta the block while boosting :D thx buddy ^_^
  11. D

    I bout a turbo kit .. any advice before installing !!?

    @TCJOBLDIE we already installed a volumex supercharger 8.5 psi before we r looking for something new and difficult to tune that what makes us special after all :)
  12. D

    I bout a turbo kit .. any advice before installing !!?

    @waynne: i have a way to measure the CO coming out from the exhaust .. the oxygen im not sure about it i started reading about the AFR air fuel ratio so i get more info about it
  13. D

    I bout a turbo kit .. any advice before installing !!?

    forgot to mention its on carburetor lets say i'm doing this project only to learn so i use low cost materials ans as a start i will not change the compression ratio by replacing the pistons i already have 9.2:1 compression ratio its kinda high for turbo buts its okay later i will start on...
  14. D

    I bout a turbo kit .. any advice before installing !!?

    Okay gays , in a previous thread i said that im gonna fit a turbo to my N/A 1600 engine , so i bought a turbo kit which is: -turbine of toyota numbered with 112 (small one) up to 1.5 bar water coolant and internal waist gate -inter cooler of fiat lancia delta -blow off valve HKS sequential 4...
  15. D

    New comer fitting a turbo on a N/A engine

    i need to ask for the ideal compression for the piston to the turbo as for the compression ratio i'll calculate it the next time i replace a head gasket one more thing obi_waynne can i have ur facebook account or skype so i can know more about some stuff ??

Please watch this on my YouTube channel & Subscribe.


Back
Top