Recent content by 96AccordCoupe

*sold!*

Make: HONDA Model: Accord Coupe ESi Engine size: 2.2i SOHC (Last Dyno'd at 156.6bhp or 129whp) Year: 1996 Description: Frost White, 15" Stock Wheels in average condition, Leather front seats (Electric Drivers Seat), Power Steering, ABS, SRS, Electric Windows, Sunroof etc Mileage/Condition...

Mugen do a tasty looking induction kit for the S2K. Costs the best part of a grand though, pfft. Stupid brand names. Replacing the filter with a K&N one will probably alter the engine note a little.

Could you not just run it below the stock airbox like most CAI's would do or are you dead set on having a feed in the front?

Yeah, I'm guessing it's what they used to try and find the right bolts for me. The page they are looking at says Rear Stabilizer/Lower Arm. There must be a page for the rear suspension as those parts aren't listed on the page they were looking at. Im gonna ask to see the index, do what you...

Before I ordered them I wasn't entirely sure what was needed. I just asked the mechanic to show me what they need under the car and then I showed the guy at Honda the same thing. They attempted to make a comparison on the crap diagram they have and messed it up. I have only recently...

So my suspicions proved accurate this morning. The bolts Honda supplied me are indeed the wrong items. They gave me the lower arm bolts instead of the lower strut bush flange bolts. The difference between the two is 2mm in diameter and about 6 inches in length! So Honda have...

The 'etc' was a very loose etc. Would require a heeeeeell of a lot of work but that was the figure he threw out there as a target to work towards if N/A was my chosen route. To be honest I'm still considering turbo due to practicality. and then there is nitrous for value for money. It's still...

Finally my bushes arrive after 2 weeks of impatient waiting. Something so small has been keeping me from so much joy! Anyways got a space in the garage on Friday so piccies then assuming all goes well lol Edit: For those of you who don't know (coulda swore I updated my thread) I have been...

Tis a good question Prince, I've always wondered what airbag and hydraulic suspension was like to corner with.

I like to think I'm a little wiser nowadays when it comes to the law, but I was 17 back then and didn't know better. Good info though.

When I went on the dyno, the car had a power dip at about 4.5krpms due to it leaning out and it taking a second to alter the mixture. The guy suggested a fuel pressure regulator to help sort this. I've decided to replace my old injectors (probably been on it for the entire 108k miles) and a...

I read an interesting thread on the Wizards of Nos forum which mentioned porting and polishing the head not being as beneficial as some folks think, with the 3 angle valve grind being an absolute must. I need to do more reading on this.

Ooh... Sharpened Boomerang Wielding Ninja Midgets with Fricken Laser Beams on their heads! Possibly an aftermarket option only I'm thinking.

Oh I have no doubt... I've already started work on my underground tunnel network and am currently searching for a baby midget to train up to throw deadly sharpened boomerangs!