Borg
New member
I have 306 Xsi 2.0 8v 1996 and terrible problem with my hand brake, car have rear disks and hand brake mechanically operate brake piston actually it should have, one wheel (left one) is ok but other is not.
This problem is driving me crazy,
when I pull handbrake left wheel is fixed but right one is not! I have replaced both rear disks and disk pads but with no change, right brake caliper was overhauled because hand brake mechanism was seized in caliper body. Now it is moving but it is not pushing brake piston! I already try to tight brake cable but no improvement.
And brake works when i press pedal but with lever only one wheel.
Does anyone knows what should I do or try?
And I have to mention that my registration is expired so I can't take chance to drive it to authorized mechanic.
This problem is driving me crazy,
And brake works when i press pedal but with lever only one wheel.
Does anyone knows what should I do or try?
And I have to mention that my registration is expired so I can't take chance to drive it to authorized mechanic.