205 Mi16 Rally Car

If anyone may be interested..

205 Mi16 Tarmac rally car...

spec list..
Engine:

*Fully rebuilt (earlier this year) 1.9 16v Mi16 Alloy Block - All new parts, Big end bearings, valve stem seals, cambelt, waterpump etc.

*Ported and polished head

*Pug Racing 2 piece 4 branch mainifold, Magnex System, 95DB

*Twin weber 45's (Setup by Sigma Engineering earlier this year, made 179bhp on RR with graph) Cost £350

*BE3 1.6 Gearbox with a Quaife 4.8 FD and a Gripper Plate LSD

*PTS Sump baffle

*8v High capacity sump.

Suspension & Brakes:

*Bilstein adjustable PTS style front struts, Rose jointed top mounts.

*Bilstein Rear Dampers GRP A

*Disc Rear Beam, Saxo VTS rear calipers.

*Polybushed wishbones

*306 GTI-6 front brakes 283mm with Mintex M1144 pads

*Hydraulic handbrake

*Wilwood Bias Valve.

Interior:

*Cobra Evolution Wrap Around bucket seats.

*Sabelt 6 point harnesses

*Sparco steering wheel

*Rollcentre roll cage

*Terratrip intercom

*Lifeline Zero 2000 plumbed in extinguisher, Lifeline 2ltr Handheld.

*Brake and fuel lines inside car.

Other Bits:

*PTS Style sump guard

*Tank guard.

*12 1.9 GTI Wheels, some with road tyres, 2 with brand new Kuhmo CO3's, 2 worn, 4 Yokohama A048's quite worn.

Loads of spares inc:

Rear beam, 306 gti calipers, rear shocks, starter, 3 alternators, windscreen, radiator, front wishbones, front springs, rear calipers, pads
and discs, bonnet, doors, wing, tailgate, lights, coils, front subframe, be3 box, std pedal box, wheels and tyres, doorcards, front side
glass, rear box, plugs, gear linkages, drag links, rear beam stud pins, rotor arms, water pipes, goodridge hoses, rear brake pads, wiper
blades.

Car is running at approx 180bhp

Offers around £6000...or px or any deal on...subaru, evo, clio 182, type r etc road car

Thankss
 

Please watch this on my YouTube channel & Subscribe.


Back
Top