Search results

  1. andyalbone

    front bumper respray/repair

    not been on for a while been quite busy a quick question about my front bumper. should i take the bumper of and just take that to my chosen body shop? or do they need the car there to get a better colour match?
  2. andyalbone

    another new car Integra Dc5

    so today i got another new car im hoping as its a newer car than what im used to il be keeping it for quite a while. il get pics up tomorrow after i have cleaned it the car itself is a 2002 dc5 with only 92k miles and 1 owner from new was a bit of a bargain but does need a couple of tyres...
  3. andyalbone

    driving experience prestwold hall

    today i went on my driving experience which my mrs got me for my birthday last month and it looked like i booked a good day for it the sun was shining. Thought i would share some of the pictures of the cars available there and me behind the wheel of the cars i had. these were the passenger...
  4. andyalbone

    bridgestone tyre waiting

    so today i went to order some bridgestone re070 225/45/17 tyres but to my amazement i was told there is a waiting list of 6 weeks for this tyre if i could wait i would of of as i have read that these tyres are specifically designed for 4wd cars with high power output and were put on subaru and...
  5. andyalbone

    help with my van

    so i did a quick engine service on my renault kangoo van 1.9d glow plugs, air filter, oil and oil filter but since then my immobiliser light on the dash keeps on till the engine is warm i looked in the owners manual it just says go to dealership along with this its alot harder to get the van...
  6. andyalbone

    genuine pussy wagon?? ebay

    Just seen this on facebook make sure you read the questions at the bottem of the page made me laugh http://www.ebay.co.uk/itm/-/161107374385?roken=K4eBCO
  7. andyalbone

    a car for my mrs

    so my mrs has her heart set on buying an mx5 is there anything i should look out for when going to look at 1? it will only be used for driving around town Thanks
  8. andyalbone

    company called xado???

    ive started to notice when driving at speed my gearbox is quite hard to put into 3rd and my mechanic has told me to use this company called xado just wanted to no if anybody has used this in there gearbox? Think im going to order some and see if it works as its not expensive...
  9. andyalbone

    My gt4

    Ive the car 3 months now and finally i can start my build thread When i first brought it First job was to remove resonator box just behind the wheel arch You can see the 4 small holes they where the only things letting air flow into the filter Then i put on my new wheels...
  10. andyalbone

    how long should i leave car stood???

    This might seem like a bit of a silly question but with the celica beeing at my mums what should be the longest I should leave my car without starting it up or taking it for a quick spin? I normally leave it 3-4 weeks will this have any effect on the battery or any other parts especially in...
  11. andyalbone

    only got 10 miles

    so i finally put the superturismos on the gt4 and drive 10 miles and here a thudding from the front end get it to a garage and borrow a socket to tighten the wheel drive round the block and ask mechanic to look he says wheel is not on tight so he does it. drive half a mile the noise comes back...
  12. andyalbone

    zada tech!!!!!

    Ive been searching through the gt4oc and somebody found this company has anybody used these? If so how good are they? http://www.zada-tech.com/products/multi-gauges
  13. andyalbone

    looking for a decent tool set

    il be going to look for a mechanics tool set ive seen a couple in my price range from sealy and clarke does anybody use these or can recommend a good solid tool set and box for around £150 these are what i was looking at...
  14. andyalbone

    car covers

    can any one recommend a good car cover as i dont have a garage and want to cover the gt4 over the winter
  15. andyalbone

    my new gt4

  16. andyalbone

    proton satria gti

    ive just brought a satria gti 1.8 and its not a bad little car and is quite nippy and handles very well. was looking at getting a cold air intake but the only 1s i can find are universal fitting and was wondering if its a universal fitting works just as well as 1 thats specifically made for a...
  17. andyalbone

    need new brakes

    ive been looking online for a few day now and i cant find any rear discs and pads for my crx import all the sites i have searched only seem to have them for the uk models ive looked at sumo power, funky power, jap service parts, hond-r, jap performance parts is there any where else i can look?
  18. andyalbone

    only in nottingham

    http://www.ebay.co.uk/itm/280917851886?ru=http%3A%2F%2Fwww.ebay.co.uk%2Fsch%2Fi.html%3F_sacat%3D0%26_nkw%3D280917851886%26_rdc%3D1#shId just found this and thought you would like a laugh
  19. andyalbone

    can i take my car back from insurance company

    As my car in being looked at by my insurance company am i within my rights to take it back and with draw my claim? Only asking as i no a few people have enquired about some of the parts, surely this would work out better for the insurance company and save them some cash and i get to keep my 4...
  20. andyalbone

    broken car

    http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc7/428385_3731893249357_1036788774_3871729_1681799400_n.jpg
  21. andyalbone

    car alarm

    ive just moved house and the last 2 nights my alarm has decided to just go off at 3 in the morning waking me and all my neighbours and they dont seem to like me cause of it it never happened before could it be a case of cats just jumping up has when dustbin men go past i dont seem to set it off...
  22. andyalbone

    rover 200 engine

    so ive just been told that the rover has a hole in the piston and needs a new engine the car only cost £450 is it worth buying a new engine or just scrapping the car itself ive tried to google rover 200 engine and cant seem to find anything can any1 help?
  23. andyalbone

    removing hydro carbons

    so ive just watched wheeler dealers and they have a jag xkr and they use a machine to remove hydro carbons has any1 else had this done or plan on doing it?
  24. andyalbone

    gauges

    which are the most important gauges on modified cars boost, oil temp and so on? i see some cars with around 5-6 is that just for show or do you actually have to have that many?
  25. andyalbone

    rover 200

    so my mrs let her battery run down in her key fob on a rover 200 and we replaced the battery and it wont work? have been told that it needs taking to a main dealer to be reset surely not?
  26. andyalbone

    my car just died?

    so ive just gone to get im my car and turned the key the engine ticked over fine then the revs just seemed to die off and it turned the engine off so tried again the same happened so tried again and started driving when pulling off felt sluggish but when warmed up problem seemed to go away any1...
  27. andyalbone

    turbo timer

    just wasted to no how a turbo timer works as ive got a hks 1 fitted but it dont seem to work i thought it would just be connected to the ignition and turn on/off when key is put in? and i also have a greddy boost controller would it be worth me messing round with it or a professional do it any...
  28. andyalbone

    gt4 owners

    any one on here have a gt4 st185?
  29. andyalbone

    my new car

    just got myself a new car
  30. andyalbone

    best place for heat shield?

    now my hks induction kit is on with a cold air feed from the original box would a heat shield make any difference? if so where would be the best place to get 1 or the material to make 1?
  31. andyalbone

    integra dc2

    all the photos can be found on my profile it is for sale on autotrader and pistonheads but thought some1 on here might want a new car or nos some1 who doers thanks i want to sell my import 96 integra 1.8 vtec dont be put of by the high milage this is by far the fastest most reliable car i have...
  32. andyalbone

    forge twintake

    has anybody else seen this induction looks mad or does any 1 have it fitted to there car if so is it as good as it looks? http://www.awesome-gti.co.uk/product.php?xProd=25110&xSec=8944
  33. andyalbone

    ignition leads

    what ignition leads are best magnecor or nology?
  34. andyalbone

    induction

    what induction kit do you have on your car? i currently have a spoon induction sitting in the original air box with a cold air feed but im not a fan of it and wanted to no what other people have and think of theres?
  35. andyalbone

    lookin for new car

    i am looking to buy a new car in the next few months but cant decide what to buy? ive been looking at subaru impreza wrx/sti, honda s2000, alfa 147gta and nissan 200sx/syliva. does any1 own any of these and let me no the good and bad points of each please dont want to waste my money on a car i...
  36. andyalbone

    what do these parts do?

    ive just been going through my service history and folders and found 3 things im not sure what they are acl performance engine bearings-con rod set? wiseco forged pistons strutted 81.5mm arp racing products there bolts and studs how would they work? if any1 can tell me how these products work...
  37. andyalbone

    need help finding a part

    ive been looking all day i need a off side driveshaft for a 1996 jdm integra all i can find is 98 onwards or would that fit? thanks
  38. andyalbone

    cam belt

    how often does the cam belt need replacing on 96 integra?
  39. andyalbone

    just swapped s3 for integra

    ive just swapped my s3 for a ingetra is there anything i should look out for mechanically ive never owned a honda or vtec!
  40. andyalbone

    rwd fun

    i was looking at buying a cheapish rwd car to have some fun in just thinking what would be good was thinking mr2 or mx5?

Please watch this on my YouTube channel & Subscribe.


Back
Top