Recent content by BlkSilverRedXD

  1. BlkSilverRedXD

    1998 Pontiac Sunfire SE

    Hi Folks I'm planning on selling my current daily driver and work on another project. Thinking of getting a stock Pontiac Sunfire and turning it into a daily driver and demo car for the business. Looking to break withing 150-200 hp and 145-190 fpt Does anyone out there know what to do with...
  2. BlkSilverRedXD

    The BlkSilverRedXD project - 2003 Hyundai Elantra GLS 2.0L DOHC A/T

    http://www.torquecars.com/forums/members/blksilverredxd-albums-mobile-office-picture4785-03-elantra-2-0.html Pic of car in my profile pic and my gallery
  3. BlkSilverRedXD

    Powerplant options

    Did some shopping around today. The 2.7 is cheaper to buy than the 2.0 or 2.4 by about $200. If I could buy a donor car at an auction or something like that, I'd have the harnesses, ECU, and engine all at my disposal.
  4. BlkSilverRedXD

    Powerplant options

    That's what I'm thinking. I'm not interested in drag or street racing. I'd like quicker acceleration, more low-end power, and more torque, So I can get going in, through, and out of traffic more efficiently, but at the same time, need it to be as reliable as possible. Building a boosted engine...
  5. BlkSilverRedXD

    Powerplant options

    Hello, My mechanic told me my Elantra's engine needs to be rebuilt. This turn of events has me thinking: it would be a good excuse to upgrade or replace my engine. I have 3 options in mind: 1. rebuild, bore, and boost 2. replace with a tiburon 2.0 with less miles on it, bore and boost 3...
  6. BlkSilverRedXD

    The BlkSilverRedXD project - 2003 Hyundai Elantra GLS 2.0L DOHC A/T

    2.5" exhaust pipe, new resonator & muffler installed. Found out engine needs to be rebuilt soon, and its close to 160,000 miles. thinking of a swap to a tib 2.0 then supercharging it, or a sonata v6. Opinions?
  7. BlkSilverRedXD

    The BlkSilverRedXD project - 2003 Hyundai Elantra GLS 2.0L DOHC A/T

    Hello, and I apologise for resurrecting this thread. That intake has been modified. No more laundry hose ;). replaced with 3" piping to "nyam" air smack-dab from the front of the car. Found a slightly damaged body kit at 1/6 the original cost. For less than $100 I repaired, modified, and...
  8. BlkSilverRedXD

    wiring four 4ohm components to 2 channel 2 ohm amp

    Sorry to resurrect this but I thought I'd let you know that the problem was fixed by regrounding all the amps to one spot solidly to the chassis and the head unit/radio was changed. No more whine and better sound quality.
  9. BlkSilverRedXD

    Supercharger options for 03 elantra gls A/T

    Read on many a Hyundai forum that that SC has been discontinued and only 3 are left on the continental US. Also, "An unexpected error occured. Please try again later." was what I got when I clicked on the link. Thanks anyways. I'm gonna go with your previous suggestions of either the tC or...
  10. BlkSilverRedXD

    wiring four 4ohm components to 2 channel 2 ohm amp

    Is that 6" of GROUND WIRE or 6" inches in DISTANCE? I guess that's why most installers say to ground HUs in a new spot... I'll do the same with the EQ. One thing though about the whine I hear: the pitch of it doesn't go up or down with the engine revs. It's one consistent pitch that goes...
  11. BlkSilverRedXD

    wiring four 4ohm components to 2 channel 2 ohm amp

    tear-down started this pm.... adding 4 speakers, 4 tweeters, and another amp Plan: 4 crossover component speaker systems 150 rms wired in series to the PA 2ohm-stable, 2 channel amp. 4 infinity reference speakers (two 6"s and two 6x9's) 100 w rms series wired to pioneer 760w gm-3500t...
  12. BlkSilverRedXD

    wiring four 4ohm components to 2 channel 2 ohm amp

    under the rear seat..... underneath seat belt bolts one on each side. will see about grounding them all to one spot (where's a good spot?) and changing the RCAs. I'm also going to rewire the eq and head unit to new spots other than the factory one.
  13. BlkSilverRedXD

    wiring four 4ohm components to 2 channel 2 ohm amp

    No.... all power, ground, and remote wiring on driver side. RCAs on passenger side.
  14. BlkSilverRedXD

    wiring four 4ohm components to 2 channel 2 ohm amp

    what's the likelyhood of it being the head unit? rearranged the ground on the amps twice and made sure the connectors and surfaces were clean and that didn't help. And I guess it wouldn't hurt to check the eq's ground either, right?
  15. BlkSilverRedXD

    wiring four 4ohm components to 2 channel 2 ohm amp

    it's a jvc head unit hooked up to an eq, then to the amps; but my question was about the SPEAKER crossover for the doors. the 5½" speakers and tweeter wire up to the SPEAKER crossover component which gets the signal from the amp. The component sets are 4 ohm stabe 100w RMS , but the amp is 300 x...

Please watch this on my YouTube channel & Subscribe.


Back
Top