200sx t28 turbo (stoke on trent)

[BluntyR5GTT]

iv got a 200sx t28 turbo here in need of a rebuild as theres play in the shaft (no smoke when ran) no cracks in exhaust housing either. will do this for £100 as it is.

or i can get this rebuilt for you with standard thrust bearing for £300 or with 360 bearing for £360 this will also include the turbo being bead blasted to look brand spanking new. could even fit a pulsar gtir front comp wheel for that extra bit of oomph for an extra £30.





my number 07742969607

[jarrus]

Very tempting.....

[BluntyR5GTT]

be tempted haha. Had lots of interest but nothing serious will make a great turbo when rebuilt its not got even one crack in ex housing.

[jarrus]

At the moment I have a Garrett T28BB from a maptun saab, the exhaust housing on it has a few cracks around the wastegate. I intend to weld up the wastegate or get a wastegate-less housing for it,

I take it this isn't ball baring?

[BluntyR5GTT]

no its not ball bearing mate and iv now put it on ebay due to being let down quite a few times with it

http://cgi.ebay.co.uk/ws/eBayISAPI.d...T#ht_563wt_932

[jarrus]

What A/R is the exhaust housing? and the compessor?
Do you have a picture of the serial numbers and the like,

I'll send an e-mail to Garrett and see if they can give me a compressor map.

[BluntyR5GTT]

.60 comp. .64ex housing. Hope this helps mate