Torque Cars chat forums - View Single Post - Two stroke diesel: Build a simple ECU ??? Do-able, or not?

pgarner · 23-03-2008, 08:03 PM

ok its not allowing me to edit my own post.

had another quick think about what i had said above you could run it off one point of the dizzy cap and have the rotor arm of the cap connected to the flywheel with the point touching where the piston is just as its opening the intake this way the injector comes on while air/fuel mix is going into the combustion chamber ( does this sound ok to you I dont fully understand the 2 stroke engines )

i understand that this will be no good a set up if it works as the gear box will need to be connected up but would it work as a starting point ?

23-03-2008, 08:03 PM	#19 (permalink)
pgarner Moderator Torque Junkie Car: VW Bora (184.6bhp) Join Date: Jul 2007 Location: Lockerbie, SW Scotland Posts: 2,032	Re: Two stroke diesel: Build a simple ECU ??? Do-able, or not? ok its not allowing me to edit my own post. had another quick think about what i had said above you could run it off one point of the dizzy cap and have the rotor arm of the cap connected to the flywheel with the point touching where the piston is just as its opening the intake this way the injector comes on while air/fuel mix is going into the combustion chamber ( does this sound ok to you I dont fully understand the 2 stroke engines ) i understand that this will be no good a set up if it works as the gear box will need to be connected up but would it work as a starting point ? __________________ -6 at half 8 in the morning. Get out in your cars global warming isnt working yet Last edited by pgarner; 23-03-2008 at 08:05 PM.