Torque Cars chat forums - View Single Post

pgarner · 11-09-2007, 03:31 PM

help after having the bora for a month ave decided to put the amp and subs in the boot have got everything done except the power cable
i cant find any rubber grommets against the bulkhead but there is a heatshield over it
the oly 1 i could find is beside where the mai wiring loom enters car have put a thinner wire through first rather tha drilling it wider the wire goes into the car on the offside but cant find where it comes back out any help appreciadted

waynne am hopin you can help as your audi has the same engine and im hoping its mounted transversly with the inlet maninfold at the rear so you can see what i mean

11-09-2007, 03:31 PM	#1 (permalink)
pgarner Super Moderator Torque Junkie Car: VW Bora (184.6bhp) Join Date: Jul 2007 Location: Lockerbie, SW Scotland Posts: 2,898	wiring for the bora help after having the bora for a month ave decided to put the amp and subs in the boot have got everything done except the power cable i cant find any rubber grommets against the bulkhead but there is a heatshield over it the oly 1 i could find is beside where the mai wiring loom enters car have put a thinner wire through first rather tha drilling it wider the wire goes into the car on the offside but cant find where it comes back out any help appreciadted waynne am hopin you can help as your audi has the same engine and im hoping its mounted transversly with the inlet maninfold at the rear so you can see what i mean __________________ Good news !! Winter is on the way !!